Jennifer Thoden

How To Interline Your Drapery Panels



Posted: Monday, July 16, 2007

by Jennifer Thoden
Thoden Publications LLC

Interlining your drapery panels can make all the difference between sewn drapes and custom, professional drapes. Interlining is a layer of thin batting that is sewn in-between the fabric and lining of your drapery panels.

Interlining adds body and insulation to your drapery panels… and it protects your fabric from the harsh sunlight and cold.

Plus, if you’re making silk drapery panels… interlining will make your silk look wonderful! There’s no question… if you’re sewing silk curtains, you must interline them for the absolute best effect.

Interlining drapery panels are very easy and I’m going to show you exactly how to do this. Plus, I’m going to give you some critical tips that will save you frustration in the long term.

I’m going to try to generalize these instructions so that you can apply these instructions to any style drapery panel… flat or pleated.

Step 1. Plan the cut length of your fabric, lining and interlining.

You need to cut your fabric to the finished length of the drapery panel plus the amount fabric needed for your bottom hem plus 4" for the top of your drape. This 4" measurement is a rule of thumb, but can be changed to your design. If you plan on a 3" heading, then change 4" to 3".

Example of cut fabric length

Finished drapery length = 60"

Heading width = 4"

Fabric for hem = 8" (for a 4" double hem)

Cut fabric length = 60" + 8" + 4" = 72"

I will cut my fabric so that it is 72" long.

You will cut your lining and interlining to the finished length of the drapery panel less 1" plus 4" for the bottom hem.

Example of cut lining and interlining length

Finished drapery length = 60"

Hem = 4" (for a 2" double hem)

Cut lining length = 60" + 4" = 64"

Cut interlining length = 60" + 4" = 64"

Step 2. Hem Your Fabric as instructed

Step 3. Sew and overlock stitch across the top edge of your fabric to keep it from unraveling and fraying.

Step 4. Hem Your Lining and Interlining

  • Fold up the bottom edge 2" and press. Then 2" again and press. Sew along the folded edge to secure the hem.


  • Repeat for the interlining.


  • Lay the RIGHT side of the interlining against the WRONG side of the lining. Aligning all edges.


  • Pin in several places to keep these pieces from slipping apart.


  • Treat this as your lining panel for your drapery instructions.


    • Your Drapery Heading

    Your instructions may tell you to fold the top of your drapery down twice. In the case of interlining, this will be too thick.

    Instead, you’re going to fold the top edge of your drape down once… so that the top edge of your interlining is against the inside of the top fold of your panel.

    If you’re sewing flat panel drapes, then sew the bottom overlocked fabric edge in place… you can do this by sewing a blind hem stitch, hand whipstitching or sewing a straight stitch across your drapery panel.

    If you are pleating your heading, then follow your instructions to pleat your drapery panel.

    You will not need buckram or crinoline to stiffen your drapery heading.

    This Article has been viewed 15,848 times. (Not updated in real-time.)
    Top-level comments on this article: (3 total)
    » left by Dianna
    from Jamestown, NY     4 years 238 days ago.
    Very helpful. I just needed a refresher on interlining. Shouldn't the lining and interling be cut 60-1=59+4=63?
    » left by Linda from Chicago 4 years 141 days ago.
    Dianna - do you sew custom draperies? I am looking for someone to make a pinch pleated drape for a sliding glass door in Mayville, NY. Please let me know. Thanks...Linda
    » left by June
    from Rockville, MD     2 years 167 days ago.
    Yes, this was very helpful. I would not have thought about eliminating the buckram when using interlining. I'm wondering about the side hems though....I guess the interlining is included in the double 1 1/2 inch side hems....that seems like it would be thick.
     
    Thanks so much for posting this. I can probably figure it out from here.
     
    -June
    We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.